This is an introductory post about using apply, sapply and lapply, best suited for people relatively new to R or unfamiliar with these functions. There is a part 2 coming that will look at density plots with ggplot, but first I thought I would go on a tangent to give some examples of the apply family, as they come up a lot working with R.

I have been comparing three methods on a data set. A sample from the data set was generated, and three different methods were applied to that subset. I wanted to see how their results differed from one another.

I would run my test harness which returned a matrix. The columns values were the metric used for evaluation of each method, and the rows were the results for a given subset. We have three columns, one for each method, and lets say 30 rows, representing 30 different subsets that the three methods were applied to.

It looked a bit like this

method1 method2 method3

[1,] 0.05517714 0.014054038 0.017260447

[2,] 0.08367678 0.003570883 0.004289079

[3,] 0.05274706 0.028629661 0.071323030

[4,] 0.06769936 0.048446559 0.057432519

[5,] 0.06875188 0.019782518 0.080564474

[6,] 0.04913779 0.100062929 0.102208706

We can simulate this data using rnorm, to create three sets of observations. The first has mean 0, second mean of 2, third of mean of 5, and with 30 rows.

m <- matrix(data=cbind(rnorm(30, 0), rnorm(30, 2), rnorm(30, 5)), nrow=30, ncol=3)

###
__Apply__

When do we use apply? When we have some structured blob of data that we wish to perform operations on. Here structured means in some form of matrix. The operations may be informational, or perhaps transforming, subsetting, whatever to the data.

As a commenter pointed out, if you are using a data frame the data types must all be the same otherwise they will be subjected to type conversion. This may or may not be what you want, if the data frame has string/character data as well as numeric data, the numeric data will be converted to strings/characters and numerical operations will probably not give what you expected.

As a commenter pointed out, if you are using a data frame the data types must all be the same otherwise they will be subjected to type conversion. This may or may not be what you want, if the data frame has string/character data as well as numeric data, the numeric data will be converted to strings/characters and numerical operations will probably not give what you expected.

Needless to say such circumstances arise quite frequently when working in R, so spending some time getting familiar with apply can be a great boon to our productivity.

Which actual apply function and which specific incantion is required depends on your data, the function you wish to use, and what you want the end result to look like. Hopefully the right choice should be a bit clearer by the end of these examples.

First I want to make sure I created that matrix correctly, three columns each with a mean 0, 2 and 5 respectively. We can use apply and the base mean function to check this.

We tell apply to traverse row wise or column wise by the second argument. In this case we expect to get three numbers at the end, the mean value for each column, so tell apply to work along columns by passing 2 as the second argument. But let's do it wrong for the point of illustration:

apply(m, 1, mean)

# [1] 2.408150 2.709325 1.718529 0.822519 2.693614 2.259044 1.849530 2.544685 2.957950 2.219874

#[11] 2.582011 2.471938 2.015625 2.101832 2.189781 2.319142 2.504821 2.203066 2.280550 2.401297

#[21] 2.312254 1.833903 1.900122 2.427002 2.426869 1.890895 2.515842 2.363085 3.049760 2.027570

Passing a 1 in the second argument, we get 30 values back, giving the mean of each row. Not the three numbers we were expecting, try again.

apply(m, 2, mean)

#[1] -0.02664418 1.95812458 4.86857792

Great. We can see the mean of each column is roughly 0, 2, and 5 as we expected.

###
__Our own functions__

Let's say I see that negative number and realise I wanted to only look at positive values. Let's see how many negative numbers each column has, using apply again:

apply(m, 2, function(x) length(x[x<0]))

#[1] 14 1 0

So 14 negative values in column one, 1 negative value in column two, and none in column three. More or less what we would expect for three normal distributions with the given means and sd of 1.

Here we have used a simple function we defined in the call to apply, rather than some built in function. Note we did not specify a return value for our function. R will magically return the last evaluated value. The actual function is using subsetting to extract all the elements in x that are less than 0, and then counting how many are left are using length.

The function takes one argument, which I have arbitrarily called x. In this case x will be a single column of the matrix. Is it a 1 column matrix or a just a vector? Let's have a look:

apply(m, 2, function(x) is.matrix(x))

#[1] FALSE FALSE FALSE

Not a matrix. Here the function definition is not required, we could instead just pass the is.matrix function, as it only takes one argument and has already been wrapped up in a function for us. Let's check they are vectors as we might expect.

apply(m, 2, is.vector)

#[1] TRUE TRUE TRUE

Why then did we need to wrap up our length function? When we want to define our own handling function for apply, we must at a minimum give a name to the incoming data, so we can use it in our function.

apply(m, 2, length(x[x<0]))

#Error in match.fun(FUN) : object 'x' not found

We are referring to some value x in the function, but R does not know where that is and so gives us an error. There are other forces at play here, but for simplicity just remember to wrap any code up in a function. For example, let's look at the mean value of only the positive values:

apply(m, 2, function(x) mean(x[x>0]))

#[1] 0.4466368 2.0415736 4.8685779

###
__Using sapply and lapply__

These two functions work in a similar way, traversing over a set of data like a list or vector, and calling the specified function for each item.

Sometimes we require traversal of our data in a less than linear way. Say we wanted to compare the current observation with the value 5 periods before it. Use can probably use rollapply for this (via quantmod), but a quick and dirty way is to run sapply or lapply passing a set of index values.

Here we will use sapply, which works on a list or vector of data.

sapply(1:3, function(x) x^2)

#[1] 1 4 9

lapply is very similar, however it will return a list rather than a vector:

lapply(1:3, function(x) x^2)

#[[1]]

#[1] 1

#

#[[2]]

#[1] 4

#

#[[3]]

#[1] 9

Passing simplify=FALSE to sapply will also give you a list:

sapply(1:3, function(x) x^2, simplify=F)

#[[1]]

#[1] 1

#

#[[2]]

#[1] 4

#

#[[3]]

#[1] 9

And you can use unlist with lapply to get a vector.

unlist(lapply(1:3, function(x) x^2))

#[1] 1 4 9

However the behviour is not as clean when things have names, so best to use sapply or lapply as makes sense for your data and what you want to receive back. If you want a list returned, use lapply. If you want a vector, use sapply.

###
__Dirty Deeds__

Anyway, a cheap trick is to pass sapply a vector of indexes and write your function making some assumptions about the structure of the underlying data. Let's look at our mean example again:

sapply(1:3, function(x) mean(m[,x]))

[1] -0.02664418 1.95812458 4.86857792

We pass the column indexes (1,2,3) to our function, which assumes some variable m has our data. Fine for quickies but not very nice, and will likely turn into a maintainability bomb down the line.

We can neaten things up a bit by passing our data in an argument to our function, and using the … special argument which all the apply functions have for passing extra arguments:

sapply(1:3, function(x, y) mean(y[,x]), y=m)

#[1] -0.02664418 1.95812458 4.86857792

This time, our function has 2 arguments, x and y. The x variable will be as it was before, whatever sapply is currently going through. The y variable we will pass using the optional arguments to sapply.

In this case we have passed in m, explicitly naming the y argument in the sapply call. Not strictly necessary but it makes for easier to read & maintain code. The y value will be the same for each call sapply makes to our function.

I don't really recommend passing the index arguments like this, it is error prone and can be quite confusing to others reading your code.

I hope you found these examples helpful. Please check out part 2 where we create a density plot of the values in our matrix.

If you are working with R, I have found this book very useful day-to-day R Cookbook (O'Reilly Cookbooks)

You suggest using apply() on a matrix or data.frame, but it's very important to note that apply() always coerces its first argument to a matrix/array. This is important because a matrix/array can only contain a single atomic type, whereas a data.frame can contain columns of varying types/classes.

ReplyDeleteWhen a data.frame is converted to a matrix, it will be converted to the highest atomic type of any of the columns of the data.frame (e.g. if the data.frame has 9 numeric columns and 1 character column, it will be converted to a 10 column character matrix).

Hi Joshua, thank you I was not fully aware of that, and it has bitten me in the past as well. I have updated the post.

DeleteThanks for stopping by, nice to see you here!

Great post! Thank you so much for sharing..

ReplyDeleteFor those who want to learn R Programming, here is a great new course on youtube for beginners and Data Science aspirants. The content is great and the videos are short and crisp. New ones are getting added, so I suggest to subscribe.

https://www.youtube.com/watch?v=BGWVASxyow8&list=PLFAYD0dt5xCzTQHDhMPZwBoaAXWeVhZzg&index=19

This comment has been removed by the author.

ReplyDeleteThank you for this insightful and practical post.

ReplyDeleteIn the 3rd to last paragraph, you mentioned that you do not recommend passing the index argument in the way you just demonstrated. So, what method would you recommend?

In general, instead of passing the indexes to use, I would try pass the data itself and let the internals of apply do the subsetting and make the function operate on that data, vs subsetting the data manually in the apply function we pass in.

DeleteThis isn't always possible though I know, and it is fine to pass indexes really, I am just a bit uptight about it I think.

Thanks for you comment though and sorry for the delayed reply, I always have trouble posting comments on blogger!

Hi Pete,

ReplyDeleteIn your second paragraph under "using sapply and lapply" you are trying to tell us why we might want to use sapply and lapply instead of apply because we might "require traversal of our data in a less than linear way" and that we also might want to "compare the current observation with the value 5 periods before it."

However, in your subsequent answer to this problem you raised you only give us an alternative way of doing the exact same calculation you did using the apply() method (i.e. testing the means of the three rnorm-methods).

Could you please provide an example highlighting how the use of sapply or lapply would enable me to traverse through data in a less than linear way and allow me to compare a current observation with a value 5 periods before it in a way that the apply() cannot?

Please note that I am still a beginner in R.

Thanks in advance :)

I would like to have the example too.Can you plz post it whenever you get a chance.Thanks

DeleteSuch a great post!

ReplyDelete"Great blog created by you. I read your blog, its best and useful information. You have done a great work. Super blogging and keep it up.php jobs in hyderabad.

ReplyDelete"